AVPro Edge Full HDR, 4K60 4:4:4 70m Slim Extender [AC-EX70-444-RNE]

(0) No Reviews yet
SKU: AC-EX70-444-RNE



This HDBaseT Receiver is the perfect companion to AVPro Edge's HDBaseT matrix switchers. Its slim design and rich features make this small unit the perfect solution for HDR Distribution. Using standard category you can distribute a 18Gbps signal up to 70 meters. Utilizing ICT (Invisible Compression Technology), deliver a virtually lossless high bandwidth 4K HDR signal with support for all signals up to 18Gbps. Deep Color and HDR Metadata remain intact making the transmission free of artifacts like banding. Other similar devices will deliver a sub-par image that has very visible banding and color shifting. 

Key benefits of using AC-EX70-444-RNE: 

Invisible Compression Technology: ICT is a revolution in HDMI extension technology. This proprietary technology can compress high bandwidth HDMI signals into a more manageable size to fit through a CAT Cable "pipe". The ICT algorithm can manage all flavors of HDR including 4:4:4, 4:2:2, and 4:2:0 as well as signals up to 18Gbps and 4K 60Hz 4:4:4. The architecture of ICT allows it to be compatible with all chroma subsampling types, color spaces and HDMI Deep Color up to 12 Bit. 

Extend 4K 60 4:4:4 and HDR Signals: The length of manufactured HDMI cable is unchangeable after it is made and they are unreliable after about 25FT. Additionally, HDMI connectors can only be terminated in specialized factory environment due to its extremely high frequencies and high density. This does not allow installers or users to remake or make cables on a DIY basis. CAT-6A cables are available widely and can be reworked easily by the installer or end-user. Additionally, using CAT cable allows the user to change components as technology changes. By using AC-EX70-444-RNE, the transmission distance for HD 1080P is up to 100 meters (330’) and UHD, 4K resolution the distance reaches an impressive 70 meters (230’). 

Total EDID Management: The AC-EX70-444-RNE works has robust EDID control. EDID management allows you to manage the input device and request specific video resolutions and/or audio codecs. the following EDID options are available: 
  • EDID Bypass 
  • 1080P 2CH Audio 
  • 1080P 8CH Audio 
  • 4K60 4:2:0 2CH Audio 
  • 4K60 4:2:0 8CH Audio 
  • 4K60 4:4:4 HDR 2CH Audio 
  • 4K60 4:4:4 HDR 8CH Audio 
  • USER EDID – EDID Copy 
The EDID Copy Function allows you to copy and save from any display or projector you want to. 

On Board Troubleshooting: This unit allows you to generate a 1080P or 4K test pattern to identify external problems (source, repeater, displays, etc...). You can now be sure that your wiring is correct and get to the bottom of problems quickly should they arise, without having to worrying if the source or sink is working properly. You can generate a test pattern from the Tx or the Rx so you can verify total system infrastructure integrity.  

Cascade: AC-EX70-444 features HDMI signal equalization and amplification. This allows for a “daisy chain” of AC-EX70-444 extenders for extremely long distance transmission. With unique bi-directional power, there is no need for a power source where the Rx and Tx meet up in a daisy chain, simply power the first Tx and the second Rx and power will be provided to the middle remotely. 

IR & RS232 Management: IR & RS-232 are bidirectional and can control the sources from the sinks or vice versa. In addition you can use the I-PASS port to plug you Control System emitter ports directly into the IR (I-PASS) port on the transmitter (via mono 3.5mm cable) for clean and reliable IR pass through, unique VPC (Voltage Protection Circuit) allows you to do this without wear and tear on the electronics inside. 

  • HDMI 2.0(a/b) 
  • 18Gbps Bandwidth Support (Using ICT) 
  • Ultra Slim (.47 inch/12mm) 
  • Up to 4K60 4:4:4 Support 
  • Full HDR Support (HDR 10 & 12 Bit) 
  • HDR, HDR10+ and HLG Support 
  • 4K --> 1080P Down-scaling for mixed systems 
  • EDID Management and EDID emulate 
  • 4K & HD Test Patterns built into Tx and Rx for troubleshooting 
  • Ethernet Hub Capability 
  • L/R Audio Extraction on Tx and Rx 
  • HDCP 2.2 (and all earlier versions supported) 
  • CEC Pass Through 
  • 3D Support 
  • 100M (330ft) on 1080P (Cat6a) 
  • Up to 70m (230ft) on 4K (up to 4K60 4:4:4, HDR) (Cat6a) 
  • Bi-directional 48v PoH (Power Over HDBaseT, only one Power Supply Needed) 
  • I-Pass Feature for control system "pass-through" 
  • 3-20v protection circuit built in for safe IR transport 
  • Bi Directional RS232 Transport 
  • LED Status, Link, Power indication lights 
  • Use single UTP/STP LAN cable (CAT-5E/6A) with substitute HDMI cable to achieve long distance transmission. 
  • Supports uncompressed PCM 2- Ch., LPCM 5.1 & 7.1, Dolby Digital, DTS, Dolby TrueHD, DTS HD-Master Audio, Atmos 
  • ESD protection circuitry (Inputs & Outputs) to 7KV 
  • Can Cascade
Compatible with AC-DA210-HDBT, and ConferX line of Wallplates, Transmitter, Switchers, and AVPro edge Matrixes.


WARNING: This product can expose you to chemicals including Lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov

Ratings & Reviews

No reviews available

Be the first to Write a Review