The AC-MX44-AUHD is a true 4x4 HDMI matrix switch. Supporting HDMI 2.0(a/b), HDCP 2.2, up to 4K video resolution, and up to 18 Gbps bandwidth. This switch allows any source (Blu-ray, UHD Blu-ray, satellite receiver, game consoles, PCs, etc ... ) to be shown on any of the connected displays. This matrix equalizes and amplifies the output to ensure the HDMI signal can be transmitted through long HDMI cables without loss of quality.
Audio Delay is “On-Board” so you can manage lip-sync issue before it is a problem. Also with built in Scalers you don't have to forfeit that 4K signal just because you have a couple older displays. All that with Full EDID management allows maximum flexibility with today's wide mixture of sources and displays.
This is an ideal solution for digital entertainment centers, HDTV retail, show sites, data centers, schools, conference and training centers and more!
Key Benefits of using the AC-MX44-AUHD:
HDBaseT Compatibility Mode (HDBT-C) ~ This EXCLUSIVE AVProEdge technology allows you to convert high bandwidth signals that are between 9 Gbps - 18Gbps like UHD Players, HDR Content, Gaming Systems, PC's, and Media Players. The conversion uses a proprietary algorithm that impacts the original image a little as possible so you can transmit your HDR and high bandwidth signals over long distance transmission devices like HDBaseT Extenders (AC-EX70-UHD) or use a display that does not support 18G. Best of all, this is managed on a per output basis so you have complete control over what individual runs are "down-clocked"
4K Up/Down Scaling ~ This technology is managed on each output. This will allow you to upscale 1080p sources to 4K (With Image Enhancement), or downscale 4K sources to individual outputs that may not support 4K to 1080p. This completely eliminates the problem that all other matrices have that forces them to "dumb down" the entire system even if there is only 1 old 1080P display.
Extreme EDID Management ~ With 29 on board EDID's, including HDR EDID's, not getting a picture is simply a thing of the past. You can manage the input side of the switch by selecting a preloaded EDID. INSTANTLY read an EDID from any connected display and apply it to the desired input, all with the push of a button. Goodbye EDID problems...
The user can extract 2 Channel PCM audio from each output (Balanced 5-Pin Terminal Block, pre-made conversion to L/R cables available). NOTE: the Analog Port only supports 2CH PCM - for down-mixing check out AC-ADM-AUHD or AC-ADM-COTO
It features 4 digital optical toslink outputs for with support for 7CH LPCM, Dolby Digital, Dolby Digital +, DTS, DTS Master Audio.
Extracted audio routing options include
Bind to output (extracted audio switches with the video, this is the default mode)
Bind to input (extracted audio is fixed to the corresponding input by the same number)
Independent (extracted audio can be routed however you like and there are commands to allow it to function as a separate matrix)
Audio Delay ~ With the AC-MX44-AUHD you can manage audio delay on the balanced or digital outputs per output. This features up to 630ms of delay so your lip sync problems simply vanish. Audio delay can be managed directly from the front panel for ease of use and simple setup with the push of a button.
Built In Test Pattern ~ The unit features an internal test pattern that can be initialized to verify that the infrastructure after the Matrix is in tact. This saves hours of painful troubleshooting, and allows you to identify problems before they become problems. Pattern is per output.
18Gbps True 4K60 4:4:4, 4x4 Matrix
18Gbps Bandwidth Support
4K60 4:4:4 Support
Full HDR Support (HDR 10 & 12 Bit)
Dolby Vision, HDR10+ and HLG Support
HDCP 2.2 (and all earlier versions supported)
1080p > 4K & 4K > 1080p Up /Down Scalers on each output
Advanced EDID Management
IR, RS-232 and LAN Control Options
FOR CALIFORNIA RESIDENTS
WARNING: This product can expose you to chemicals including Lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov