Options Available: 2
HDBaseT™ Extenders with Control
TechLogix Networx
Model Number: HDBaseT™ Extenders with Control
Unit of Measure:

Available Options

Qty

TL-TP100-HDC HDMI & Control over Twisted Pair Cable Extender

HDMI cables are great for transmitting audio and video signals short distances, but larger buildings and larger rooms often need electronics inline to ensure signal performance. Simply pulling a long HDMI cable or connecting multiple HDMI cables together can cause signal drop out, interference, pixelization and a host of other signal and performance problems. 

The TL-TP100-HDC replaces a traditional HDMI cable with active electronics designed specifically for sending video signals up to 330 feet. Plus, built-in IR and RS232 control signal embedding allow you to also transmit remote control commands with the HDMI stream.

In actual practice, this means you can use the TL-TP100-HDC to send audio and video signals from your source device (often a switcher, cable box, or DVD player) to your destination device (often a display or projector) and control the source device remotely...all using a single twisted pair cable. In other words, you can install your source device in a remote closet or cabinet and control it with the same remote control used for your display. Now that’s a clean installation!

Technical Features

  • Transmit HDMI, RS232 & IR over a single twisted pair cable
  • Extend 1080p HD up to 330 ft. (100m.)
  • Extend 4K@30 HD up to 230 ft. (70m.)
  • Embedded bi-directional IR and RS232 control
  • Two Ethernet pass-through channels
  • System powered from either the transmitter or receiver
  • HDBaseT Certified

Installation

  1. Run a twisted pair patch cord with RJ45 connectors (see TL-TP6S-RJ) between your source device and destination device.
  2. Connect the TL-TP100-HDC transmitter (included in the package) to your source device with an HDMI cable.
  3. Connect the TL-TP100-HDC receiver (included in the package) to your destination device with an HDMI cable.
  4. Optionally connect the IR control ports, RS232 control ports, or Ethernet pass-through ports if your system requires control.
  5. Connect the twisted pair patch cord with RJ45 connectors (see TL-TP6S-RJ) to the twisted pair input ports on the TL-TP100-HDC transmitter and receiver.
  6. Connect the power supply (included in the package) to the DC 12V port on either the TL-TP100-HDC transmitter or receiver.
  7. Connect the power supply (included in the package) to an AC outlet or power source.

TL-TP70-HDC HDMI & Control over Twisted Pair Cable Extender

HDMI cables are great for transmitting audio and video signals short distances, but larger buildings and larger rooms often need electronics inline to ensure signal performance. Simply pulling a long HDMI cable or connecting multiple HDMI cables together can cause signal drop out, interference, pixelization and a host of other signal and performance problems.

The TL-TP70-HDC replaces a traditional HDMI cable with active electronics designed specifically for sending video signals up to 230 feet. Plus, built-in IR and RS232 control signal embedding allow you to also transmit remote control commands with the HDMI stream.

In actual practice, this means you can use the TL-TP70-HDC to send audio and video signals from your source device (often a switcher, cable box, or DVD player) to your destination device (often a display or projector) and control the source device remotely...all using a single twisted pair cable. In other words, you can install your source device in a remote closet or cabinet and control it with the same remote control used for your display. Now that’s a clean installation!

Technical Features

  • Transmit HDMI, RS232 & IR over a single twisted pair cable
  • Extend 1080p HD up to 230 ft. (70m.)
  • Extend 4K@30 HD up to 130 ft. (40m.)
  • Embedded bi-directional IR and RS232 control
  • System powered from either the transmitter or receiver
  • HDBaseT Certified

Installation

  1. Run a twisted pair patch cord with RJ45 connectors (see TL-TP6S-RJ) between your source device and destination device.
  2. Connect the TL-TP70-HDC transmitter (included in the package) to your source device with an HDMI cable.
  3. Connect the TL-TP70-HDC receiver (included in the package) to your destination device with an HDMI cable.
  4. Optionally connect the IR or RS232 control ports if your system requires control.
  5. Connect the twisted pair patch cord with RJ45 connectors (see TL-TP6S-RJ) to the twisted pair input ports on the TL-TP70-HDC transmitter and receiver.
  6. Connect the power supply (included in the package) to the DC 12V port on either the TL-TP70-HDC transmitter or receiver.
  7. Connect the power supply (included in the package) to an AC outlet or power source.

HDMI cables are great for transmitting audio and video signals short distances, but larger buildings and larger rooms often need electronics inline to ensure signal performance. Simply pulling a long HDMI cable or connecting multiple HDMI cables together can cause signal drop out, interference, pixelization and a host of other signal and performance problems.



Use the TL-TP100-HDC or TL-TP70-HDC to send audio and video signals from your source device (often a switcher, cable box, or DVD player) to your destination device (often a display or projector) and control the source device remotely...all using a single twisted pair cable. In other words, you can install your source device in a remote closet or cabinet and control it with the same remote control used for your display. Now that’s a clean installation!


TL-TP100-HDC


The TL-TP100-HDC replaces a traditional HDMI cable with active electronics designed specifically for sending video signals up to 330 feet. Plus, built-in IR and RS232 control signal embedding allow you to also transmit remote control commands with the HDMI stream.


  • Transmit HDMI, RS232 & IR over a single twisted pair cable
  • Extend 1080p HD up to 330 ft. (100m.)
  • Extend 4K@30 HD up to 230 ft. (70m.)
  • Embedded bi-directional IR and RS232 control
  • Two Ethernet pass-through channels
  • System powered from either the transmitter or receiver
  • HDBaseT Certified


TL-TP70-HDC


The TL-TP70-HDC replaces a traditional HDMI cable with active electronics designed specifically for sending video signals up to 230 feet. Plus, built-in IR and RS232 control signal embedding allow you to also transmit remote control commands with the HDMI stream.


  • Transmit HDMI, RS232 & IR over a single twisted pair cable
  • Extend 1080p HD up to 230 ft. (70m.)
  • Extend 4K@30 HD up to 130 ft. (40m.)
  • Embedded bi-directional IR and RS232 control
  • System powered from either the transmitter or receiver



Categories: Category Extenders
Related Products